Enterasys Networks CSX7000 User Manual Page 372

  • Download
  • Add to my manuals
  • Print
  • Page
    / 729
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 371
USER’S GUIDE
372 CyberSWITCH
MONTHLY CALL CHARGE CONFIGURATION ELEMENTS
STATUS
Allows you to enable or disable the monthly call charge option.
M
AXIMUM MONTHLY CHARGE
The maximum monthly charge value. The legal values are from 1 to 10,000,000. This value is
specified according to the country’s currency.
A
CTION
Select the action to be taken if the maximum monthly call charge is exceeded. The Stop Calling
action will cause the system to stop initiating switched calls. Dedicated connections and incoming
calls will continue to operate normally. The continue calling action will cause the system to
continue making calls even after the maximum monthly charge is exceeded.
MONTHLY CALL CHARGE BACKGROUND INFORMATION
Currently, this feature is only supported on connections to NTT, NET5, and 1TR6 switches. The
“Advice of Charge” information element delivered by the switches are required to track phone call
charges.
When the Monthly Call Charges option is enabled, phone call charges are tracked by the system. If
the total call charges exceed this configured maximum during the month, the configured action will
be taken. At the beginning of a new month, the current total call charges will be reset to 0.
The LCD panel displays the current total call charges for the month. If the configured maximum
call charges are exceeded, the system reports a message and the configured action is taken. Refer to
the LCD Messages chapter for a listing of the associated LCD messages.
CALL RESTRICTIONS
CONFIGURING CALL RESTRICTIONS
Note: Certain restrictions apply to the use of Call Restrictions and Semipermanent Connections.
Refer to the Background Information discussion.
U
SING CFGEDIT
1. Select Call Restrictions from the Call Control Options menu.
2. Follow the onscreen instructions for enabling this feature.
3. The current call restriction configuration will be displayed.
4. Enter the number Id associated with the parameter you want to change.
5. Follow the onscreen instructions for changing the parameter.
Page view 371
1 2 ... 367 368 369 370 371 372 373 374 375 376 377 ... 728 729

Comments to this Manuals

No comments