Enterasys Networks CSX7000 User Manual download pdf (Page 265)

100

101

Central Site Remote Access Switch 265

ONFIGURING

DVANCED

RIDGING

Bridge Dial Out

CONFIGURING THE DEVICE LIST FOR BRIDGE DIAL OUT

Note: The Configuring Device Level Databases chapter contains the information needed to

completely configure an on-node device entry. The following section provides instructions

for entering on-node device information specific to the bridge dial out feature.

SING CFGEDIT

1. Select Security from the main menu.

2. Select Device Level Databases from the security menu.

3. Enable the On-node Device Database if it is currently disabled.

4. Select On-node Device Entries from the authentication database menu.

5. Select Add. Provide the device name, as prompted, and continue with device configuration, as

described in Configuring Device Level Databases:

6. Under ISDN, select Dial Out Phone Number:

7. Provide device’s dial out phone number, as prompted.

8. Return to the Device Table Menu, and select Bridge:

Device Table Menu: (Device = "DAN")

1) ISDN

2) Frame Relay

3) X.25

4) Digital Modem

5) Authentication

6) IP

7) IPX

8) AppleTalk

9) Bridge

10) Compression

Select function from above or <RET> for previous menu: 1

Device ISDN Menu: (Device = "DAN")

1) ISDN Line Protocol. "PPP (Point to Point Protocol)"

2) Base Data Rate. "64000 bps"

3) Initial Data Rate. "64000 bps"

4) Maximum Data Rate. "128000 bps"

5) Dial Out Phone Number(s). ""

6) Subaddress. ""

7) Profile Name. "Default_Profile"

8) H0 Call Support DISABLED

Id of option to change or press <RET> for previous menu: 5

1 2 ... 260 261 262 263 264 265 266 267 268 269 270 ... 728 729

Comments to this Manuals

No comments

Enterasys Networks CSX7000 User Manual Page 265

Comments to this Manuals