Enterasys Networks CSX7000 User Manual Page 312

  • Download
  • Add to my manuals
  • Print
  • Page
    / 729
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 311
USER’S GUIDE
312 CyberSWITCH
Routers shown in the diagram above. Sample configurations for the objects in the above network
diagram are as follows:
Note: The DHCP Server must have a route specified to get back to the DHCP-enabled router
Ruby, or use Alex as its default gateway.
Configuration for IP Router "Alex" Configuration for IP Router "Ruby"
System Information:
System Name = Alex
System Password = stone
System Information:
System Name = Ruby
System Password = rubble
Security Level = Device Level (On-node
Device Database, PAP security)
Security Level = Device Level (On-node
Device Database, PAP security)
Bridging disabled Bridging disabled
IP enabled (router mode)
I/F = LAN (192.168.1.168)
I/F = WAN (192.168.10.168)
Static Route = (dest) 204.157.42.0
(next hop) 192.168.10.1
IP enabled (router mode)
I/F = LAN (204.157.42.168)
I/F = WAN (192.168.10.1)
DHCP enabled
Relay Destination #1 = 192.168.1.5
(interface =N/A”)
Hop Count Threshold = 4
DHCP enabled
Relay Destination #1 = 192.168.10.168
(interface = “N/A”)
Hop Count Threshold = 4
Device = “Ruby”
ISDN Line Protocol = PPP
Dial Out Phone # = 5311
PAP Password = “rubble”
IP Address = 192.168.10.1
IP Routing = enabled
Make calls for IP data = enabled
Bridging = disabled
Device = “Alex
ISDN Line Protocol = PPP
Dial Out Phone # = 5411
PAP Password = “stone”
IP Address = 192.168.10.168
IP Routing = enabled
Make calls for IP data = enabled
Bridging = disabled
Page view 311
1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 728 729

Comments to this Manuals

No comments