Enterasys Networks Smart 2200 User Manual download pdf (Page 51)

Optional Installations and Mode Switch Bank Settings B-1

Optional Installations and

Mode Switch Bank Settings

The top cover must be removed to gain access to the mode bank switches, to install optional

FLASH or DRAM Single In-line Memory Modules (SIMMs), or to install an optional High Speed

Interface Module (HSIM) or Very High Speed Interface Module (VHSIM).

This appendix covers the following items:

• Required tools (Section B.1)

• Removing the chassis cover (Section B.2)

• Locations, functions, and settings for the mode switches (Section B.3)

• Installing optional SIMM upgrades (Section B.4)

• Location of Optional HSIMs (Section B.5)

B.1 REQUIRED TOOLS

Use the following tools to perform the procedures provided in this appendix:

• Antistatic wrist strap

• Phillips screwdriver

ELECTRICAL HAZARD: ONLY QUALIFIED SERVICE PERSONNEL SHOULD

ATTEMPT THE FOLLOWING PROCEDURES.

NUR QUALIFIEZIERTE SERVICE PERSONNAL DIE FOLGENDE PROCEDURE

FOLGEN SOLLTEN.

SOLAMENTE PERSONAL CALIFICADO DEBE INTENTAR ESTE PROCEDIMIENTO.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 61 62

No comments

Enterasys Networks Smart 2200 User Manual Page 51